Water Proof Watch Pressure Tester

Model

RT-1000A

Specimens

Flammable, explosive, easy volatile material sample test; Storage of corrosive substance sample test,biological test and strong electromagnetic emission source sample test are prohibited.

Volume

1000 L

Inner Dimension

W1000×H1000×D1000 mm

External Dimension

W1600×H1950×D1450 mm

Weight

400kg

Air Switch

63A

Power Supply

AC220V 50/60HZ Single Phase Three Lines 6 m2 Copper Wire

Performance Specification

Using Environmental:

Temperature:5~30 Deg C, Humidity<85%R.H. (Without load)

Water Temperature

1. Water temperature can not controlled (environmental temperature)

2. (RT+15 Deg C) ~ 70 Deg C (Optional)

IPX1

Method name: vertical drop water test

Sample placement: according to the normal working position of the sample, it is placed on the rotating sample table with 1r/min. The distance between the top of the sample and the drip outlet is not more than 200mm

Test conditions: the droplet amount is 1.0+0.5mm/min.Test duration: 10min

IPX2

The method name: tilt 15 degree drop test

Sample placement: make sample with a vertical into 15 degree Angle, sample top to drop water mouth distance not greater than 200 mm, each try after a plane, in another side, a total of four times.

Test conditions: the droplet amount is 3.0+0.5mm/min.Test duration: 4 * 2.5min, 10min

IPX3

Swinging radius: 400mm

Water flow: 1.12 ~ 2.50L/min

Average flow speed per hole: 0.07 L/min, 16 holes in total, pore diameter: 0.4mm.

Test time: 10 min, the test sample rotated 90 degree after 5 min

IPX4

The semidiameter of swing pipe : 400mm

Water flow: 1.61 ~ 2.50L/min

Average flow speed per hole: 0.07 L/min, 23 holes in total, pore diameter: 0.4mm.

IPX5

Water flow: 12.5L/min

The diameter of hole: Dia. 6.3 mm.

Test time: no less than 3min.

IPX6

Water flow: 100L/min

The diameter of hole: Dia. 12.5 mm.

Test time: no less than 3min.

Standards comply with

JIS-D0203 and IEC-60529

GB/T 2423.38 2006 / IEC 60068-2.18:2000 in the second part of the spray experiment method

GB4208-2008 / IEC60529-2001 shell protection grade